Step 1: Remove the 4 M4 bolts on the back of the number plate bar.

Step 2: Grab the new longer M4 bolts and washers. 

Make sure to use Loctite Blue on the bottom of the bolts. This helps keeping them tight under vibrations.

Step 3: If you don't have our number plate light, you will need to use the supplied washers for the middle two bolts to make everything level.


Step 4: Slide in one sides indicator holder, once in place tighten until it is firm.

Do the same for the other side.

Step 5: Make sure all of the 4 new bolts are tight.

Try to use number plate bolts with the bracket, as these help keep the indicator attachments straight.