Step 1: Remove the 4 M4 bolts on the back of the number plate bar. | |
Step 2: Grab the new longer M4 bolts and washers. Make sure to use Loctite Blue on the bottom of the bolts. This helps keeping them tight under vibrations. |
|
Step 3: If you don't have our number plate light, you will need to use the supplied washers for the middle two bolts to make everything level. |
|
Step 4: Slide in one sides indicator holder, once in place tighten until it is firm. Do the same for the other side. |
|
Step 5: Make sure all of the 4 new bolts are tight. Try to use number plate bolts with the bracket, as these help keep the indicator attachments straight. |
|