BMW S1000RR/R Adjustable Tail Tidy
The Gen 1 - 3 variant:
- ...does not have indicator holders, so you will need to add indicator holders separately, if you need them
- ...has holes to mount the Static Plate Light
£85.00
Fitment:
|
S1000RR GEN 1-2 |
2008 - 2016 |
|
S1000RR GEN 3 (This gen has metal studs coming out of the tail plastics where the tail tidy sits, you’ll need to reuse the rubber washers that come from stock, or you could remove the studs) |
2015-2018 |
|
S1000RR/M1000RR GEN 4 2 Options: |
2019-2023
|
|
S1000R GEN 1-2 (This gen has metal studs coming out of the tail plastics where the tail tidy sits, I provide some nylon spacers you could use, or reuse the rubber washers that come from stock, or you could remove the studs) |
2013-2020 |
|
S1000R/M1000R GEN 3/4 2 Options:
|
2021-2023
|
— International customers: If you have a plate wider than 6" - or you have pre-drilled holes, you may need plate extenders.
— The brackets come equipped with two strong, adjustable torque hinges. Once set they wont need adjusting again and will hold their position through high speeds and bumps.
— You can adjust the strength of the stiffness on these brackets to suit your needs.
— We recommend a 7x5" plate to avoid the plate catching the wheel. Generally, naked bikes are less forgiving and sportsbike are ok as they have higher tails.
— The brackets come pre-assembled and loctited.
— You can also find in your package information on how to use your bracket.
The brackets intended 'flipped' use is for motorcycle shows, track events, private land, photos/videos - content creation etc. — and not to be used on the roads. If using to breach transportation laws, Flip N Dip Ltd won’t undertake any responsibility. Please make sure to also do your own research on your local traffic laws.