BMW S1000RR/R Adjustable Tail Tidy
The Gen 1 - 3 variant:
- ...does not have indicator holders, so you will need to add indicator holders separately, if you need them
- ...has holes to mount the Static Plate Light
£85.00
Fitment:
S1000RR GEN 1-2 |
2008 - 2016 |
S1000RR GEN 3 (This gen has metal studs coming out of the tail plastics where the tail tidy sits, I provide some nylon spacers you could use, or reuse the rubber washers that come from stock, or you could remove the studs) |
2015-2018 |
S1000RR/M1000RR GEN 4 2 Options: |
2019-2023
|
S1000R GEN 1-2 (This gen has metal studs coming out of the tail plastics where the tail tidy sits, I provide some nylon spacers you could use, or reuse the rubber washers that come from stock, or you could remove the studs) |
2013-2020 |
S1000R/M1000R GEN 3/4 2 Options: |
2021-2023
|
— International customers: If you have a plate wider than 6" - or you have pre-drilled holes, you may need plate extenders.
— The brackets come equipped with two strong, adjustable torque hinges. Once set they wont need adjusting again and will hold their position through high speeds and bumps.
— You can adjust the strength of the stiffness on these brackets to suit your needs.
— We recommend a 7x5" plate to avoid the plate catching the wheel. Generally, naked bikes are less forgiving and sportsbike are ok as they have higher tails.
— The brackets come pre-assembled and loctited.
— You can also find in your package information on how to use your bracket.
The brackets intended 'flipped' use is for motorcycle shows, track events, private land, photos/videos - content creation etc. — and not to be used on the roads. If using to breach transportation laws, Flip N Dip Ltd won’t undertake any responsibility. Please make sure to also do your own research on your local traffic laws.