Yamaha MT09 Adjustable Tail Tidy
The Gen 1 (2014-2016) variant:
- ...does not have indicator holders, so you will need to add indicator holders separately, if you need them
- ...has holes to mount the Static Plate Light
Rp1.768.000,00
Fitment:
| Yamaha MT09 GEN 1 | 2014 - 2016 |
| Yamaha MT09 GEN 2
(If you're also removing the rear hugger mount, you'll need an axle block in its place: buy here) |
2017 - 2020 SP 2018 - 2020 |
| Yamaha MT09 GEN 3 | 2021 - 2023 |
| Yamaha MT09 GEN 4 | 2024+ |
— International customers: If you have a plate wider than 6" - or you have pre-drilled holes, you may need plate extenders.
— The brackets come equipped with two strong, adjustable torque hinges. Once set they wont need adjusting again and will hold their position through high speeds and bumps.
— You can adjust the strength of the stiffness on these brackets to suit your needs.
— We recommend a 7x5" plate to avoid the plate catching the wheel. Generally, naked bikes are less forgiving and sportsbike are ok as they have higher tails.
— The brackets come pre-assembled and loctited.
— You can also find in your package information on how to use your bracket.
The brackets intended 'flipped' use is for motorcycle shows, track events, private land, photos/videos - content creation etc. — and not to be used on the roads. If using to breach transportation laws, Flip N Dip Ltd won’t undertake any responsibility. Please make sure to also do your own research on your local traffic laws.