Generic Bracket Adjustable Tail Tidy
The 3cm variant:
- ...is reversible. So it can also be used as a low/tucked mount
- ...does not have indicator holders, so you will need to add indicator holders separately, if you need them
- ...has holes to mount the Static Plate Light
Fdj19.400,00
Check out what our customers say
This is a simple bracket with generic spacing, that's can be used on a range of bikes.
Have a look on your bike and check the area where the tail tidy is mounted, if you have a flat surface with two holes to mount a tail tidy, you could get away with using this bracket.
Please look through the size options and pick the best size for your motorcycle.
These bracket come with generic set of bolts: 2x M6 25mm, with washers and nuts.
— International customers: If you have a plate wider than 6" - or you have pre-drilled holes, you may need plate extenders.
— The brackets come equipped with two strong, adjustable torque hinges. Once set they wont need adjusting again and will hold their position through high speeds and bumps.
— You can adjust the strength of the stiffness on these brackets to suit your needs.
— We recommend a 7x5" plate to avoid the plate catching the wheel. Generally, naked bikes are less forgiving and sportsbike are ok as they have higher tails.
— The brackets come pre-assembled and loctited.
— You can also find in your package information on how to use your bracket.
The brackets intended 'flipped' use is for motorcycle shows, track events, private land, photos/videos - content creation etc. — and not to be used on the roads. If using to breach transportation laws, Flip N Dip Ltd won’t undertake any responsibility. Please make sure to also do your own research on your local traffic laws.